The electronic assembly line has a very high utilization rate now, and the fence guarantees that the conveyor belt is always working normally, so what should we pay attention to when installing the rollers and rollers? Let's get up today and take a look. The following requirements must be met:

Electronic assembly line

1. Then fix the rack on the foundation or floor. After the belt conveyor is fixed, feeding and unloading devices can be installed.

2. Hanging the conveyor belt When hanging the conveyor belt, first lay the conveyor belt strip on the idler roller of the unloaded section, enclose the driving roller, and then apply it on the idler roller of the heavy-duty section. The 0.5-1.5t hand winch can be used for hanging the belt. When tightening the belt to connect, the roller of the tensioning device should be moved to the limit position, and the trolley and spiral tensioning device should be pulled toward the transmission device; and the vertical picking device should move the roller to the upper side.

3. All rollers must be arranged in rows, parallel to each other, and kept horizontal.

4. All the rollers are arranged in a row, parallel to each other. Before tightening the conveyor belt, the reducer and motor should be installed, and the braking device should be installed on the inclined conveyor. After the belt conveyor is installed, an idling test machine is required.

5. The supporting structure must be straight and horizontal. For this reason, after the installation of the driving roller and the supporting roller frame, the centerline and level of the conveyor should be rear-aligned.