The double-speed chain automatic production line is a self-flowing production line equipment. The double-speed chain automatic production line is designed and manufactured according to the specific production requirements, which can meet the requirements of different production conditions. Guang Shengde here to share the maintenance method of the double-speed chain automatic production line.

1. Maintenance method for reducer of double-speed chain automatic production line:

Put lubricating oil into the reducer for the first time in about three months, clean the reducer with diesel or gasoline, and add new lubricating oil to the center of the observation window immediately after cleaning. Replace the lubricating oil once a year in the future. Too much lubricating oil may cause the reducer to heat up, and the motor load is too large, causing the motor protection switch to jump. Too little lubricating oil will cause the reducer to heat up, increase noise, and the gearbox is scraped off.

2. Maintenance method for head motor of double-speed chain automatic production line:

The motor of the double-speed chain automatic production line shall not enter water, nor shall it be added with diesel oil and liquid organic compounds to the motor, which will damage the motor insulation and cause widespread failure. The maintenance method of the governor head is the same as the maintenance method of the motor. Check the rest of the motor maintenance manual.

3. Chain maintenance method of double-speed chain automatic production line:

After the double-speed chain automatic production line runs for a long time, the chain may cause the original lubricating oil to volatilize, and cause the chain to appear unbalanced, increased noise, and crawled during operation. At this time, you can open the tail sealing plate and add butter or thicker lubricating oil to the double-speed chain.