The lower fuselage line structure of Guangshengde machine box aging test production line (total 40 meters)

1: The support adopts 50mm*50mm*2..0mm square pass, the height of the working surface: 740±20

2: Both sides of the line body are assembled from super-strength 100*118mm triple-speed aluminum profiles;

3: The lighting adopts 40W single tube with cover fluorescent tube, and the lamp frame material adopts 25*50 iron flat pass. Single-side three-stage control.

4: Assemble the power supply system, install two-position plug-in seats at each station, 1.2 meters per set;

5: The assembly part has a four-meter installation conductive groove

6: Assemble the quick connector air source triple piece 40SM with 20PH quick connector;

7: Craft Kanban adopts aluminum craft card holder with A4 acrylic board;

8: The wind batch chute adopts 28*35 aluminum material;

Guangshengde machine box aging test production line layer fuselage line structure (total 40 meters)

1: The bracket adopts 50mm*50mm*2..0mm square pass,

2: Both sides of the line body are assembled from super-strength 100*118mm triple-speed aluminum profiles;

3: Assemble the power supply system, install two-position plug-in seats at each station, 1.2 meters per set;

3: Assemble the quick connector air source triple piece 40SM with 20PH quick connector;

4: Conductive groove is installed in the middle